optiplex 9030 This is a topic that many people are looking for. passionistsisters.org is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, passionistsisters.org would like to introduce to you Bios Password Reset Dell Optiplex 9030 AIO. Following along are instructions in the video below:
“Dear us and welcome back to my it workshop. This is alvin real and in in this video. We re going to reset the system password for the dell optiplex 03 zero all in one so as you can see that s the whole computer. And now i m going to see you allow me a few seconds to adjust my camera and i will turn on the computer.
So as soon as i turn it on and the computer boots up we d see the dell logo and we see this message this computer system. This serial. Number is protected by a password authentication system. You cannot access the date on this computer.
Without the correct password. Please type. The system or administrator. Password and as you can imagine.
I don t have the password. So i m going to type it a few times so but again i don t have so we cannot reset the password using software because we cannot access the usb or the bios or windows. So we have to reset the password using hardware okay so if you want to know more about resetting. The system password or bios password for many models you can do it in the playlists on the top right of the screen.
So next. We don t have anything else to do so we have to shut it down allow me a few seconds to show you around so i m going to connect everything i m going to disconnect the power as well so allow me a few seconds. And i m going to turn the computer or over so. As you can see here.
This is how it looks and now make sure that you have a flat surface. Maybe you are going to use a cloth or something. So you don t damage the screen okay so in my case. This disc is very flat doesn t have anything on it so i m not going to damage it so now here we are so the first thing you have to do well.
I am suing you optiplex and you consider the serial number that is covered you see all these in the back and now we have to release these two locks. I m showing you here with my two fingers. But i did a bad job doing it so i m going to show you here. So you can see you see those two locks.
That says one on one you have to push them today to the center in some other models there are screws but in this specific model. We have these two locks okay so once you put the two logs in the middle you push them to the middle. It s going to be free to remove the cover sotae do that or otherwise you re going to have a really hard time or you might break some of the locks inside the case. So now that i have done that the first thing.
I m going to do i m showing you that they don t have any jewelry or any watches on my hands or on my wrist. And now i m going to press. The power button for about 10 seconds. This video sped up in many places.
So you don t have to wait the actual time so using your thumb you can release that you have to press kind of hard. I m going to use my other thumb. Because apparently small is stronger and that s how you release it so you can see there the hole. And you can and that s the button that you have to press.
So we re going to put it aside. We don t need it for now and next since i have released the locks. We have to start pulling up as i m doing it here so if this is the first time you re doing this i advise you to do it very carefully take your time don t rush. It because you might break things that i m going to show you in a few more seconds.
But you have to press pull it up very slowly the way. I m doing it and you re going to hear some cracks. But it s not it doesn t mean. It s you re broken.
And you re breaking the case. Just means you re releasing all the locks. That it has so as you can see here and removing it slowly. And i have i have unlocked if you will all the lower part so i m going to pull it up as you can see me do it here and the upper part is in my opening.
The most difficult you have to be very careful very careful when you remove it so you don t break anything and again be very careful when you do this especially. If this is your first time trying to do this so as you can see here. I m going i have remove it i want to show you the locks. So that s kind of the clips.
I m sorry and that one is kind of broken. So that s something that you have to avoid okay. So as you can see here i m showing you inside all these locks are plastic. So make sure that you do it as carefully as you can okay.
So you are never be careful now i ll show you they everything so you can see the fans you can see the processor well the fan for the process or you can see the connector to usb and it s very dirty so taking advantage that i removed the call the case. I m going to just use my compressed air to clean. It a little so it s going to be better. It has a lot of dust and after we have done that we are going to continue so most of the things on this model is something on the right in this part and by the way.
I have a video where i remove the hard drive for this model is replaces for an ssd. So i m going to leave the link in the description below for that video. So you have to press with your fingers or with your thumb or sometimes with the screw with a screwdriver and now you can remove it sometimes very hard. But in this case.
It was okay what wasn t that bad so you remove it that way and now we can see many things we can see the ram. We can see the cmos battery. There we can see the hdd. The hard drive and this is expandable you can put an m2 ssd here.
If you need more space. So now we have to look for the jumper. So in this model is over here because here i m going to do a close up. And there you go you can read their password jumper and you can see it s kind of blue.
I have seen in another other colors like black so but in this case. It s blue so keep that in mind and the only thing we have to do is remove it as you can see here we have other pins. That one that one and the one where the jumper is so just use your fingers. You don t you need to use much much strength so you just remove it brace.
It i m not touching any of the electronics on the on the motherboard. I try to avoid that because we don t really need it so that s the way you can avoid damaging your motherboard or the circuitry. So i did something with a camera. There so now you can see it better so i ve removed a jumper.
I don t have anything else to do here. So. The next step is going to be to this is a good time for you to remind you to subscribe to the channel and like and press. The like button ok.
So now i ll show you i put it against the wall. You can see the motherboard in all this glory. I m going to connect the power now as you consider and i m going to turn it around and put it again against the wall. So i m going to connect also the usb for the keyboard and the mouse and then i m going to press.
The power button so we can see what happens now i press. It on the right with me with my hand and we re waiting a few seconds. There you go the l logo and the bill. You slow down in this part.
Because we re going to see this message. The hardware jumper is removed to override the system password setting system password has been erased and password cannot be changed. Please connect the hardware jumper to perform any password changes. So this goes by very fast.
So that s why the video is slowed down and after that that s pretty much it work in other words. So after this message is goes by you have access to windows. Now. But if you don t put the jumper back at it says everything is going to give you this message every time you turn on the computer.
So we don t want that as you can see here and here s windows. We don t have any that anything else to do here i m going to just shut it down and now i m going to disconnect the power as you see me doing here also going to remove the mouse and the keyboard and or any other device that i may have connected to this computer. So i m going to turn it over again. I m going to put it the screen face in the table.
And now the only thing. I m going to show you here and the only thing left to do for us is to put back the jumper. The same way we did it the same way we remove it so we re going to be in the same place. As you can see me doing here.
And that s pretty much it excuse me so that s pretty much it all we have to do here and next. We have to put the cover this first cover and it s very easy to do you just have to make it fit. And you press. It to the left and you re going to hear a click now we re going to put the cover so we start from the main from the ball from the top.
I m sorry i m showing you here well you re not seeing it i m going to allow me a few seconds and you can see here all the clips. So we have to make them fit as well so that might take you the first time a few seconds. It s not difficult at all to do is very very very simple and then once you have done that you re going to feel that it fits and now you can put the rest of the cover. So you re going to hear some cracks.
When i start pressing it so the only thing. I m doing here is press. It down every every part and you have heard the noises. So once you once you stop hearing the noises it means everything is secure.
So i m going to press. The power button for around 10 seconds. Now to get rid of any power store in the capacitors on the motherboard and now i m doing my final check. I don t hear anymore no i mean cracks and now i m going to put to the stand.
And you can see here we have these two kind of i don t know what to call them. But they have to fit in these two square holes. So i just put it there press it down and you hear the click so that s pretty much it and now comes the final test well the semi final test. I have to pull it up and it doesn t have to follow so you can see here and doing that nothing is falling.
So that s pretty good so we have done it correctly. So now i m going to allow me a few seconds such as my camera. I m going to connect the power. I m going to connect the usb mouse and the usb keyboard and then we re going to start the computer.
We re going to turn it on to see what happens now let me see some more seconds. There is the dell logo and now i m pressing f2 to access the bios so there you go allow me a few extra seconds to choose the camera well i think that s gonna be it so you can read there dell optiplex nine zero three zero all in one now we have access to the bios. So we are going to go to security to expand. It now we go to system password and as you can see on the right is not set.
So this is the password that was configured at the beginning of the video. That s why as soon as you turn on the computer. You are going to you are going to be asked for that password so it s not configured now. It has been erased and we can also see the admin password.
Which is the password for tobias that means you can access the bios you can access windows. But you cannot do any change to the body all right so i m going to go now to the boot sequence. I m going to show you that you can change anything i m going to remove the diskette and i can save the changes alright. I can just press escape and it s going to restart the computer.
Because i m just showing you that the password is no longer there we have reset. It now. I m not going to press. Anything now windows is loading and as you can see we have access to windows.
Now so that s what i wanted to show you in this video is a way to reset the bios or system password for this specific module and dell optiplex. 9. 03 zero all in one so if you liked this video please. Like and subscribe.
If you have any other common or questions leave it in the comment section below. ” ..
Thank you for watching all the articles on the topic Bios Password Reset Dell Optiplex 9030 AIO. All shares of passionistsisters.org are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.